Technical manual, Software, CAD data

HMI

Software

Screen Creator Advance2 Ver.0.1.1.6 Build01(41 MB)

2024.08.19 Update

It is drawing program for GC-A2 series
How to update the firmware of GC-A20 series(972 KB)

2021.04.19 Update

How to update the firmware of GA-A24,GA-A25,GA-A26 series.
Replace File for SCA2 software(5 KB)

2020.02.05 Update

This is the file for provisional measure against communication failure between our programmable touch screen “GC-A2” series and Mitsubishi Electric Corporation’s PLC “QnA” series. Please replace file by following procedure manual.
SCA2 Procedure manual for replacing file(90 KB)

2020.02.05 Update

This is the procedure manual for replacing measurement file against communication failure between our programmable touch screen “GC-A2” series and Mitsubishi Electric Corporation’s PLC “QnA” series.

GC-A2 Series Firmware Screen Creator Advance2 Ver.0.1.1.6 Build01(7 MB)

2024.08.19 Update

This is the firmware for the GC-A2 series for displaying the screen data created by Screen Creator Advance2 Ver.0.1.1.6 Build01.
This file is data used when updating firmware using only a USB memory stick, without using a computer.
Unzip the downloaded file onto a USB memory stick, insert the USB memory stick into the GC-A2 unit, and update the firmware from the GC-A2's system menu.
GC-A2 Series Firmware　SCREEN CREATOR 5 Ver.3.2(553 KB)

2022.04.28 Update

This is the firmware for the GC-A2 series for displaying the screen data created by SCREEN CREATOR 5 Ver3.2.

SCREEN CREATOR 5 User' Manual(2 MB)

2012.07.23 Update

In this manual, when use the Screen Creator 5 V3.xx and OIP GC-70, it is explained about necessary information.

Ver3.2
SCREEN CREATOR 5 User's Manual Vol.1(1 MB)

2012.05.29 Update

Vol.1 Introduction
SCREEN CREATOR 5 User's Manual Vol.2(2 MB)

2012.05.29 Update

Vol.2 Operations
SCREEN CREATOR 5 User's Manual Vol.3(4 MB)

2012.05.29 Update

Vol.3 Connection with PLC
SCREEN CREATOR 5 User's Manual Vol.4(9 MB)

2012.05.29 Update

Vol.4 Standard parts catalog
SCREEN CREATOR 5 User's Manual Vol.5(513 KB)

2012.05.29 Update

Vol.5 Control reference
SCREEN CREATOR 5 User's Manual Vol.6(1 MB)

2012.05.29 Update

Vol.6 K-Basic Program Description
SCREEN CREATOR 5 User's Manual Vol.7(267 KB)

2012.05.29 Update

Vol.7 Trouobleshooting and ERROR codes

Vol_1_SCA2_INTRODUCTION(2 MB)

2019.01.31 Update

Vol.1 Introduction
Vol_2_SCA2_OPERATIONS(4 MB)

2019.01.31 Update

Vol.2 Operations
Vol_3_SCA2_CONNECTION_WITH_PLC_AND_EXTERNAL_DEVICES(2 MB)

2019.01.31 Update

Vol.3 Connection with PLC and external devices
Vol_4_SCA2_STANDARD_PARTS_CATALOG(8 MB)

2019.01.31 Update

Vol.4 Standard parts catalog
Vol_5_SCA2_CONTROL_REFERENCE(1 MB)

2019.01.31 Update

Vol.5 Control reference
Vol_6_SCA2_K-BASIC_PROGRAM_DESCRIPTION(3 MB)

2019.01.31 Update

Vol.6 K-BASIC program description
Vol_7_SCA2_TROUBLESHOOTING_AND_ERROR_CODES(801 KB)

2019.01.31 Update

Vol.7 Troubleshooting and error codes
Vol_8_SCA2_FUNCTION_SECTION(4 MB)

2019.01.31 Update

Vol.8 Function

ViewJetCmore QuickStartGuide(1 MB)

Quick Start Guide：English, Japan,China, Taiwan, Korea, Thailand