How Can We Help?
TC-4 replacement
Question
I am currently using TC-4.
I would like to exchange it, but are there any alternatives?
Answer
Please refer to the table below for alternatives to TC-4.
However, since the shape and specifications are different, it may not be possible to replace it depending on the application.
Please consider this carefully.
| Mode | Replacement | Remark |
|---|---|---|
| 1 | TC-V6S | When using the proximity sensor as is Set TC-V6S to “negative logic”. |
| 8 | KCV-4S | When using the proximity sensor as is Set KCV-4S to “negative logic”. |
| 2 to 7 | None | Please contact the technical support desk. |
-Notes-
| Item | TC-4 | TC-V/KCV | Remark |
|---|---|---|---|
| Panel-cut(mm) | 96×48 | 48×48 | |
| P/S for supplying to sensor | DC12V | DC24V | If the device connected to the input has DC12V specifications,please prepare an external DC12V power supply. |
Inquiry
technical support
Click here for inquiries by email
Click here for inquiries by email